A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus® Penetrating Wood Stains (Generic)

A-Plus® Penetrating Wood Stain is a solvent based, deep penetrating stain formulated to provide decorative, water repellent, and wood preserving properties. It dries to a silk matte finish and emphasizes the grain, bringing out the natural beauty in any kind of wood.

☑Solvent-Based, High Solids
☑Fast Drying, Deep Penetration
☑Preserves and Enhances Wood
☑High Grade Staining Action
☑Ideal for Wooden Floor Parquets, Doors, Furnitures, and many more!

Category: Woodcraft and Varnishes

Specifications

Principal Uses: Interior/Exterior:Wooden surfaces

Coverage: 25-30 sqm per gallon / coat (depending on wood)

Surface Dry: 30 mins – 1 hr

Dry Through: 2 hrs

Application: Brush/Spray

Packaging: 250mL, 1L

Available in:
1272 – Wood Stain Maple
1277 – Wood Stain Mahogany
1276 – Wood Stain Wallnut
1273 – Wood Stain Rosewood
1275 – Wood Stain Empire Green
1279 – Wood Stain Black

Surface Preparation & Precautions

Make sure wood material is fully kiln dried/treated.
If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover. To remove any wood discoloration, apply A-Plus® Wood Bleach #1 & #2.
Sand surface smooth using #180 grit sandpaper to eliminate surface imperfections.
Patch up surface imperfections using A-Plus® Enamel Glazing Putty or A-Plus® Fast Drying Plastic Wood Filler.
Surface to be applied on must be thoroughly cleaned, free of any contaminants that can affect adhesion such as wax, oil, grease, moisture, and loose particles.
Avoid painting under extreme environmental conditions and/or bad weather conditions.

Painting Procedure

NEW WOOD SURFACES:

Sealer: Apply the appropriate sealer using the chosen paint system.
Stain (Optional): Apply A-Plus® Penetrating Wood Stain using either brush or spray.
Putty: A-Plus® Enamel Glazing Putty or A-Plus® Fast Drying Plastic Wood Filler. Sand lightly before topcoat application.
Topcoat: Apply at least 1-2 coats paint of choice A-Plus® Wood and Floor Varnishes.

REPAINTING:

Strip off old paint using A-Plus Supertanggal® Paint and Varnish Remover. If old finish is in good condition, sand surface to bare substrate.
If necessary, apply A-Plus® Wood Bleach #1 & #2 to remove discoloration on wood.
Make sure to clean and dry surface before applying A-Plus® Penetrating Wood Stain.