A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

A-Plus® Concrete Putty is a high-solids, water-based, masonry putty used for interior/exterior correcting of minor surface imperfections up to 2mm. It cures fast, exhibits excellent adhesion and has good sanding properties.

☑Ready-To-Use, Fast Drying, Easy Application
☑Superior Adhesion and Sandability
☑Excellent Durability, Flexibility, and Crack Resistance
☑Non-Drip, Good for Vertical or Inverted Application
☑Excellent Compatibility with most Architectural Paints
☑Non-toxic and Lead-free

Category: Wall and Surface Preparation

Specifications

Principal Uses: Ideal for interior concrete, precast, stucco, new plaster, and many more

Coverage: Full Putty: 10-12sqm per gallon
Spot Putty: 25sqm per gallon

Surface Dry: 30 mins

Recoat Interval: 2 hrs

Dry Through: 2 hrs

Clean-up Solvent: Water

Application: Putty Knife/Mortar Gun

Packaging: 1L, 4L

Surface Preparation & Precautions

Surface to be painted must be thoroughly cleaned, free of any contaminants.
For fresh concrete, apply at least 1-2 coats of A-Plus® Concrete Sealer.
Make sure surface is clean and dirt-free. Dampen surface using a rag/sponge soaked in water.
Structural defects like leaks and all sources of internal water pressure must be thoroughly sealed and repaired to prevent membrane damage.
If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover.
Avoid painting under extreme environmental conditions and/or bad weather conditions.
Do not intermix with other paint systems in order to preserve optimum product properties.
MIX WELL before using.

Painting Procedure

Suggested Painting System on Concrete Surfaces:

Primer-Sealer: Observe proper concrete curing schedule. Apply 1-2 coats of A-Plus® Concrete Sealer using either brush or roller.
Waterproofing(Optional): If concrete surface is heavily exposed to water (ex. firewalls, bathroom walls), apply at least 2 coats of A-Plus Water-Check®.
Putty: Repair all minor cracks and surface imperfections with A-Plus® Concrete Putty. For a luxuriously smooth finish, apply A-Plus® Skim Coat 501/503.
Primer(Optional): Apply at least 1-2 coats of A-Plus® Premium Acrylic Flat Latex as primer.
Topcoat: Apply 1-2 coats of your choice color of A-Plus All Weather® Paint. Allow 2-3 hours drying time between each coat.

A-Plus® Concrete Putty

Specifications

Surface Preparation & Precautions

Painting Procedure

Suggested Painting System on Concrete Surfaces:

Related products

Login