A-Plus Paints | Paint Products Manufacturers and Suppliers in Philippines

Hanscoat® Automotive Pure Acrylic Topcoat Clear is a fast drying clear and non-yellowing Acrylic topcoat paint exhibiting high gloss, excellent abrasion, chemical, and weathering resistance.

☑1-Component Thermoplastic Acrylic System
☑Utilizes the Technology of Pure Thermoplastic Acrylic Paint System
☑Superior Long Lasting Gloss and Color Retention
☑Formulated Using High Grade Performance Resins
☑Reinforced with UV Absorber and Light Stabilizer
☑Withstands Extreme Sunlight and Weather Conditions

Category: Automotive Coatings

Specifications

Principal Uses: As a durable clear topcoat for Hanscoat® Automotive Pure Acrylic Finishes

Sheen: Gloss

Coverage: 20-25 square meter per gallon / coat

Surface Dry: 5 – 10 mins

Recoat Interval: 30 mins

Dry Through: 1 week before polishing/buffing

Thinning:Hanscoat® Acrylic Super Gloss thinner at ratio 1:2, use A-Plus® PG Acrylic Flo to aid in flow-out.

Clean-up Solvent: A-Plus® Acrylic Thinner

Application: Spray

Packaging: 1L, 4L

Surface Preparation & Precautions

Surface to be painted must be free from contaminants like dirt, grease, and other foreign matters.
For Damaged Surfaces: Sand thoroughly and wipe dry with cleaning solvent prior to application of primers. If necessary, strip off old paint using A-Plus Supertanggal® Paint Remover.
For Bare Metal: Prime using either Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as an undercoat.
Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between undercoat, putty, and basecoat. Allow 15 mins flash-off time between each coat.
Observe 3-5 hours full drying time for all primers, putties, and fillers before application of colors and topcoats.

Painting Procedure

Undercoat Primer: Apply at least 2 coats of Hanscoat® Automotive Anti-Corrosive Epoxy Primer or Hanscoat® 2K Polyurethane Anti-Corrosion Primer as undercoat.
Putty: Repair all major dents and surface imperfections with A-Plus Polytite® Polyester Body Filler. For minor surface imperfections, patch up with Hanscoat® Automotive Pure Acrylic Putties.
Primer Surfacer: Apply at least 2 coats of Hanscoat® Pure Acrylic Primer Surfacer or Hanscoat® 2K Polyurethane Spray Filler to act as an intermediate coat between the undercoat, putty, and the basecoat. Allow 15 minutes flash-off time between each coat.
Basecoat: Choose desired color from Hanscoat® Automotive Pure Acrylic Paint as basecoat. Apply 2-3 full basecoats.
Topcoat: Finish with 2-3 full coats of Hanscoat® Automotive Pure Acrylic Topcoat Clear or Hanscoat® 2K Polyurethane Topcoat Clear.
Allow 10-15 mins flash-off time between each coat. Bake at 60°C for 30 mins or air dry for at least 6-8 hours (Pure Acrylic System) and 18-24 hours (2K Polyurethane System)

Hanscoat® Automotive Pure Acrylic Topcoat Clear

Specifications

Surface Preparation & Precautions

Painting Procedure

Related products

Login