Glazer Duramel® Automotive Enamel Paint

Precautions:

1. Surface to be painted must be thoroughly cleaned, free of any contaminants.
2. If previously painted, strip off all loose and chalking paint with A-Plus Supertanggal® Paint Remover.
3. Avoid painting under extreme environmental conditions and/or bad weather conditions.
4. Mix well before using.

For Wooden Surfaces:

1. Surface to be painted must be thoroughly cleaned, free of any contaminants.
2. Hammer nail holes and sand any surface defects with large grit sandpaper for better adhesion.
3. Repair cracks and other surface imperfections with A-Plus® Enamel Glazing Putty.

For Metal Surfaces:

1. Remove dust, dirt, grease, oil, wax and other foreign matter using a rag soaked in paint thinner.
2. For rusty metal surfaces, wire brush or strip affected areas after applying A-Plus® Rust Converter. Let it sit for 10 – 15 minutes before washing off surface thoroughly with water, letting it dry before applying paint.
3. Apply a premium quality metal primer such as A-Plus® Metal Primer immediately upon drying of the surface before rust sets in.